Blade 360 Dartboard, Surround & Corona Light Bundle

The Blade 360 Dartboard, Surround & Corona Light Bundle combines the Winmau Blade 360 Triple Core board, a Winmau printed surround and the Target Corona Vision lighting system. The board is made from East African sisal over a Triple Core base, the third layer reinforced with carbon fibre to raise fibre density behind the playing surface, and its defining feature is a fully symmetrical 360 degree layout with 10 balanced rotation points. The surround is a printed ring with a 436mm inner opening that sits around the outer wire, and the Corona Vision is a 685mm LED ring that clips to the board itself on four magnetic feet rather than fixing to the wall.

The board measures 450mm in diameter and 38mm deep, and its ultra-thin staple-free wiring runs at a 60 degree deflection angle with the wire width cut by 25%, so a dart striking a wire is guided into the bed rather than bouncing out. The symmetrical face is what separates the Blade 360 from a standard board: rotating the sisal is how a board is kept in service, and because every one of the 10 positions presents the same appearance, the board can be turned regularly to move wear off the treble 20 without leaving visible mismatched segments. The laser-cut steel number ring reduces glare, and the Rota-Lock mounting system holds the board level on any wall type and makes those rotations quick.

The surround runs out to 675mm, adding roughly 120mm of catching area so stray darts hit the surround rather than the wall. The Corona Vision carries 123 LEDs around the inner face of the ring and throws light inward from every angle, so darts already in the board cast minimal shadow across the trebles. Its magnetic feet grip the steel compression band on the edge of the board, so no wall fixings are needed and the ring lifts off in seconds when the board is rotated or stored, and the four supplied plug adaptors let the transformer run on any local outlet.

1 x Winmau Blade 360 Triple Core dartboard
1 x Rota-Lock mounting system
1 x Winmau printed dartboard surround
1 x Target Corona Vision light ring
4 x Corona Vision magnetic legs (2 with cable clip)
1 x Transformer
4 x Plug adaptors