Blade 6 Triple Core Dartboard, Surround & Corona Light Bundle

The Blade 6 Triple Core Dartboard, Surround & Corona Light Bundle combines the Winmau Blade 6 Triple Core board, a Winmau printed surround and the Target Corona Vision lighting system. The board is made from East African sisal built into a three-layer core, the third layer being a high-compression section reinforced with carbon fibre to increase fibre density behind the playing surface. The surround is a printed ring with a 436mm inner opening that sits around the outer wire, and the Corona Vision is a 685mm LED ring that clips to the board itself on four magnetic feet rather than fixing to the wall.

The board measures 450mm in diameter and 38mm deep, and uses ultra-thin staple-free wiring set at a 60 degree deflection angle, so a dart striking a wire is guided into the bed rather than bouncing out. Density Control wire adjusts the wire profile across the doubles, trebles and bullseye, and the hardened bullseye and outer bull are 25% thinner than the previous generation, which enlarges the target on the highest-scoring zones. A Rota-Lock mounting system and Spirit Master levelling tool are supplied with the board, so it can be hung level and rotated periodically to spread wear evenly across the sisal.

The surround runs out to 675mm, adding roughly 120mm of catching area so stray darts hit the surround rather than the wall. The Corona Vision carries 123 LEDs around the inner face of the ring and throws light inward from every angle, so darts already in the board cast minimal shadow across the trebles. Its magnetic feet grip the steel compression band on the edge of the board, so no wall fixings are needed and the ring lifts off in seconds for storage or to close a cabinet, and the four supplied plug adaptors let the transformer run on any local outlet.

1 x Winmau Blade 6 Triple Core dartboard
1 x Rota-Lock mounting system
1 x Spirit Master levelling tool
1 x Winmau printed dartboard surround
1 x Target Corona Vision light ring
4 x Corona Vision magnetic legs (2 with cable clip)
1 x Transformer
4 x Plug adaptors